Is 16.4 feet long in room?

Yes, because 16 feet is about a wall to the other wall. In some cases, it can be enough for a bedroom. 1 of 1 found this helpful.

How many feet LED lights do I need?

To determine the needed lumens, you will need to multiply your room square footage by your room foot-candle requirement. For example, a 100 square foot living room, which needs 10-20 foot-candles, will need 1,000-2,000 lumens. A 100 square foot dining room, which needs 30-40 foot-candles, will need 3,000-4,000 lumens.

How long should LED strips be?

An LED strip light is typically half an inch (10-12 mm) in width, and up to 16 feet (5 meters) or more in length. They can be cut to specific lengths using just a pair of scissors along the cutlines, located every 1-2 inches.

How many feet of strip lights do I need?

Ideally, you should look for the strip lights that have the highest amount of LEDs per foot (or meter, yard, etc).
…
A Guide on How to Buy LED Strip Lights.
Use Lumens Required Per Foot
Task lighting near source 250 to 450
Task lighting far from source 350 to 700
Indirect lighting 375 to 575
Signs 500 to 750

How do I calculate LED lights for a room?

To determine the needed lumens, you will need to multiply your room square footage by your room foot-candle requirement. For example, a 100 square foot living room, which needs 10-20 foot-candles, will need 1,000-2,000 lumens. A 100 square foot dining room, which needs 30-40 foot-candles, will need 3,000-4,000 lumens.

Do LED strip lights make your bill high?

LED strip lights do not cost a lot of electricity compared to traditional incandescent lights. Consumption is directly determined by the length of the strip light and its light density. A standard 5-meter strip will cost less than $3 a year to run, on average.

How much LED lights do I need for my bedroom?

As a handy rule of thumb, a sitting room or bedroom will generally require around 10-20 lumens per square foot, while a bathroom or kitchen will need a stronger level of lighting, at around 70-80 lumens per square foot. To work out the lumens you need, simply multiply the square footage of the room by this figure.

Do LED strip lights come off easily?

The strips will be relatively easy to peel off and will cause no damage to the wall. If anything, there may be some leftover adhesive residue that needs to be wiped clean.

Can LED strip lights cause a fire?

The possibility of led strip lights catching fire is minuscule, even though they are hot to touch. … Incandescent bulbs have a filament that emits excessive heat, the light sources can ignite a fire on overheating, but as LED lights produce light at a lower temperature, they don’t catch fire as easily.

How many can lights in a 20×20 room?

If you have a center light fixture, you should be able to use 4 inch line voltage cans or low voltage for supplemental lighting. I would go with at least 8 three inch cans for a 20 foot room.

How do I calculate room lighting?

Multiply the width by the length for each room or room segment, if applicable. Multiply the result by 1.5 to determine the estimated watts to sufficiently light a room. For example, for a room 10 feet wide by 12 feet long, multiply 10 times 12 to get 120, then multiply by 1.5 to get 180 watts.

How do you calculate foot candles?

Multiply the Length times the Width of the Room to get the Room Square Footage. For example, if the room is 10 feet wide and 10 feet long, the Room Square Footage will be 100 square feet. A foot-candle is how bright the light is one foot away from the source.

How many can lights in shower?

One recessed light is enough for smaller showers (3’x3′), but for safety and style, opt for two or more in large or luxury showers.

How far apart should 6 inch can lights be placed?

Generally speaking, recessed lights that are four inches in size should be placed four feet apart. Six-inch lights should be placed six feet apart. In other words, the diameter of the lights equals the space between them.

How close can lights be to a wall?

If you plan to illuminate an entire wall or accent particular architectural features or pieces of art, the rule of thumb is to place your recessed light fixtures between 1.5 feet and 3 feet from the wall. If your fixtures are fixed, they should be placed a bit closer to the wall.

Can lights in bedroom?

Recessed ceiling lights have become a popular way to add lighting to bedrooms. Recessed lights are perfect for providing ambient or general lighting, giving your bedroom the feel of being bathed in sunlight. They can also be strategically placed to accent specific areas or features of your bedroom.

Can lights in the kitchen?

The mistake: Too many recessed lights. … The fix: To avoid having your kitchen ceiling look like an airport runway, the general rule to follow is: use one recessed light for every 4-6 square feet of ceiling space. The formula for spacing your recessed lights is to divide the height of the ceiling by 2.

Where should bathroom lights go?

It should be placed 75 to 80 inches above the floor and, like all vanity lighting, contain at least 150 watts — ideally spread over a fixture that’s at least 24 inches long so that the light will wash evenly over the hair and face.

Can lights in a bathroom?

Can lights can provide fill-in ambient light in the bath. This type of light serves as a substitute for natural light and gives a room eye-pleasing appeal. Recessed fixtures are wonderful at providing this type of lighting. Placed around the perimeter of the room, they’ll add a soft lighting glow for the entire space.

Should I put downlights in bedrooms?

Never put a downlight over the top of the bed – you’re guaranteed a face full of glare regardless of how far you dim it. If you want downlights, position them around the edge of the room over your draws and dressers so you can see the contents. … Ideally you want a switch both by your bed and by the door.

How do I fix my dark shower?

There is a better solution to light a dark shower: the Mr Beams Ceiling Light is perfect for this application. You can mount the Mr Beams wireless LED light on the ceiling or the wall and the motion sensor technology will activate the lights when it’s dark and you’re in the shower.