Which STIHL trimmer is the best?

Overall, the ideal weed eater for almost any homeowner is the Stihl Grass Trimmer FS 56 RC-E.

How do I choose a STIHL trimmer?

What is the difference between STIHL FSA 56 and FSA 57?

The main difference with the new cutting head is that it’s far easier to reload. With the old FSA 56, you had to cut your line in half, then feed each half into the spool. With the FSA 57, you just slide the line through until you have equal amounts of line on either side of the spool.

What does the C mean on STIHL trimmers?

comfort feature
The C indicates a comfort feature. On trimmers, that comfort feature is the Easy2Start™. You can also confirm it by looking for the bar code label on the trimmer housing.

Does trimmer boss fit STIHL?

Pair this trimmer attachment with your STIHL YARD BOSS® Wheel Kit for a quality, cost-effective trimmer mower. … The STIHL FS-MM trimmer attachment features a dependable STIHL AutoCut® 25-2 trimmer head for precision cutting tasks. To advance the line, just tap the trimmer head against the ground.

What is the difference between whipper snipper and line trimmer?

The differences between line trimmers and whipper snippers

Ultimately, it all comes down to: The shaft: You will find that most whipper snippers will have a straight shaft while line trimmers will be bent. … A line trimmer is more suited to domestic, residential edging.

What does MS stand for Stihl?

Motorsäge
What does MS mean? We’ll start with an easy one. Every STIHL chainsaw model name starts with MS, MSA, or MSE. The common part, MS, stands for Motorsäge which is German for chainsaw. MSA indicates that it’s a battery chainsaw and MSE tells us that it’s an electric model.

What does FS stand for Stihl?

MS= Motosäge = Chainsaw. FS= Freischneider = Line Trimmer. BG= Blasgerät = Handheld Blower.

Is Stihl M-Tronic any good?

This may be true with some things, but Stihl’s M-Tronic system, fitted to several of their hand-held gardening products, works extremely well, with a lot of advantages. Like these M-Tronic garden tools: brushcutters and chainsaws.

What is the difference between Stihl 250 and 251?

What Is the Difference Between Stihl 250 and 251? Overall, the differences between these two models are relatively small. However, the 250 model is . 7 pounds lighter and can hold 15.9 ounces of fuel, compared with the 13.2 ounce capacity of the 251.

What replaced Stihl 025?

Stihl MS250 chainsaw
The Stihl 025 years made were 1991 – 2002, at which time it was replaced by the Stihl MS250 chainsaw.

What is the difference between Stihl ms170 and ms180?

The difference is with the chain oil capacity. The 170 is only capable of holding 4.9 ounces of chain oil at once. The 180 is slightly better. It can hold 5.1 ounces of oil.

How much does a Stihl 251 Wood boss cost?

$369.99. A powerful and fuel-efficient chainsaw that’s comfortable to use. The STIHL MS 251 WOOD BOSS® Chainsaw is designed to deliver all the power you’d expect from STIHL equipment, yet with a comfortable and ergonomic design.

Can you put a 20 inch bar on a Stihl 251?

Homeowner Chain Saws

Stihl recommends that its MS 170, MS 171, MS 180, MS 181, MS 192 and MS 211 homeowner models be equipped with guide bars between 12 and 16 inches. The MS 250 and MS 251 models are equipped with larger 45 cc engines and are capable of driving an 18-inch bar.

How much does a Stihl MS 251 weigh?

10.8 lbs.
This fully synthetic 2-cycle engine oil is specially suited for high performance chainsaws and power tools.

Master Control Lever™
POWER SOURCE Gas
POWERHEAD WEIGHT 10.8 lbs.
GUIDE BAR LENGTH (Recommended) 18 in.
OILOMATIC® CHAIN .325″ RM3
CHAIN OIL CAPACITY 6.7 oz.

What size is the Stihl Wood boss?

Stihl Gas Chainsaw Wood Boss, 18in. Bar, 45.6cc Engine, 0.325in.

What chain fits a Stihl ms251c?

Guide Bars
MS 251 C-BE Specifications – Occasional Use
POWER SOURCE Gas
OILOMATIC® CHAIN .325″ RM3
CHAIN OIL CAPACITY 6.7 oz.
ENGINE POWER 3.0 bhp

What size tree can a 14 inch chainsaw cut?

Felling medium trees – 16” to 18”

Cutting down medium size trees with a trunk of about 14″ to 16” will require a larger chainsaw of about 16″ to 18” to fell the tree in one easy pass.